How To Maintain Your Home Lift Chairs In Good Condition

When your mobility is impaired and you are buying a lift chair, the first question, you would be probably asking yourself is how you intend to maintain the chair. Mentioned below are a few of the items that can help you keep the it in good condition.

Replacing Batteries For Lift Chairs

Most likely, all Lift Chairs come with a battery back up. Despite this, batteries usually have a normal life cycle of about 2 years and will need a new set after this. By diligently replacing your battery, you can keep your lift chair running for years to come.

Fabric Stain Removal & Freshener Kit To Clean Home Lift Chairs

The fabric cleaning kit helps to restore your lift chair to the same condition it was in when you purchased it. It comes with a stain remover and a cleaning brush. These cleaners are safe for fabric and upholstery that could otherwise be cleaned with water and without the use of harsh chemicals.

Two Pack Chair Seat Incontinence Pad To Protect Lift Chairs

It is advisable that you purchase the “two pack” chair seat incontinence pads. Not only it saves you money, but you will also have an alternate pad when the other pad is being washed. It not only protects the chair from any stains, but also and soaks up any fluids. It is also machine wash friendly. It comes with three layers (suede, polyester/ rayon and polyester bottom) supported with a water proof vinyl. It also protects the chair from any embarrassing large stains.

Two Pack Chair Seat Protector

This shields the chair from any ugly stains, spills or pet hair or liquids that could leak and ruin the upholstery. They are also machine-washable.

Chair Seat & Back Protector

It protects the chair from any wear and tear, particularly on the worn-out areas and also  protects the seat, its back, and the armrests. The seat’s waterproof backing prevents any liquid from leaking through the seat and back protector, if and when spills happen. The protector is also machine washable.

Full Lift Chair Cover

The cover shields the chair from any stains or any wear and tear that needs to be covered up. It has a spandex stretch cover which stretches to the chair’s frame and makes it easy to tuck in the excess fabric.

Guide To Repairing Lift Chairs

Learn To Repair Your Own Lift Chair

For anyone that has back, knee problems or indeed any type of disability that makes getting out of a chair difficult or painful a lift chair is a boon. Recliners take the work out of getting up as they lift you up almost to a standing position. A normal lift chair will do this many times a day which may add up to a few thousand times a year. This means that they need to be serviced often and they break down as well. However you do not need to have professional service personnel to diagnose and even fix basic faults.

How To Diagnose Faults

Here are a few often encountered scenarios many users face regularly. Most of these are easy to remedy yourself with the help of an online guide or user manual.

When Your Lift Chair Breaks Down

The lift chair is not working at all and you cannot even hear the motor. In this case the power  may be unplugged or the power connection may be loose. Try plugging it in to a different power socket and check that the power cable is not frayed or broken.

Lift Chair Stops Working after A Few Cycles

If it stops working after it has lifted and reclined a few times it may be due to over heating. Leave the chair off for a few minutes and then see if it runs. This may indicate the motor needs repairing or replacement. You can buy replacement motors online at eBay or find a local listing of suppliers. The motors are not expensive to replace and you can also buy used motors.

Lift Chair Motor Runs But The Chair Does Not Move

If you can hear the motor running when you operate the controls then the gears may be stripped or faulty. As this is not something that can be solved by basic troubleshooting, it is best to engage experts to look into the system. You will need to have the movement mechanism on your lift chair serviced by a technician.

Lift Chair Does Not Lift Up User

If your lift chair can operate when empty but cannot lift you up while loaded, and you can hear the motor running then you may need a new capacitor for your motor. This requires some basic hands on from the owner as soldering skills are required. You can find capacitor and other Lift Chair Parts at Amazon. If you want to save some money from hiring Lift Chair experts, then be prepared to get your hands dirty by Fixing Lift Chairs yourself.

How to Select Between Floor Lifts and Ceiling Lifts

As the life expectancy rate of people are increasing, there is an emphasis
on streamlining elderly care due to the rising social costs of looking after this group of people. The shortfall in professional caregivers
is made up by the introduction of equipments which will increase the efficiency and productivity of patient healthcare.
When it comes to transferring elderly or disabled patients from their bed to other locations, there are a couple of device assisted
solutions that will help reduce the manual effort by caregivers. You can either use the floor lift system or the ceiling lift system, each
having its own merits. Our Stairlift Store is glad to share with our valued customers on the considerations when selecting between Floor Lift
and Ceiling Lift System.

As the life expectancy rate of people are increasing, there is an emphasis on streamlining elderly care due to the rising social costs of looking after this group of people. The shortfall in professional caregivers is made up by the introduction of equipments which will increase the efficiency and productivity of patient healthcare. When it comes to transferring elderly or disabled patients from their bed to other locations, there are a couple of device assisted solutions that will help reduce the manual effort by caregivers. You can either use the floor lift system or the ceiling lift system, each having its own merits.

Space Considerations of Floor Lift and Ceiling Lift

One major consideration point when choosing between Floor Lift System such as the Hoyer Lift and the Ceiling Lift system is the amount of space you have available in the areas of movement. Floor lift system usually takes up more space because it is on a set of wheels and pushed around by the assistant. This will be difficult if the room has furniture and other obstacles that may cause inconvenience. Moreover, floor lifts have problems moving on carpets and fitting under a bed frame. On the contrary, if you have tight space constraints, it is advisable to buy a ceiling lift which do not take up any floor space since the track is already pre-defined and installed on the ceiling.

Ceiling lifts are mostly sold to private home owners who care for their old parents at home. Floor Lifts are more mobile than Ceiling Lifts as you can push the patient hoisted anywhere in the premise, even outdoors. The latter is constrained by the track system laid and is less mobile.

Price Comparison

Though these two patient transfer systems perform the same function, their prices do differ significantly. A good Floor Lift system such as the Invacare Hydraulic Patient Lift costs only about $500. Ceiling Lift systems are usually more costly because of the stronger motor and the track system that needs to be installed. A normal ceiling lift can cost upwards of $1000.

Maintenance Floor Lifts and Ceiling Lifts

Before you decide to purchase either lift systems, you must consider the operations and maintenance because it is for the long term. Operations wise, both floor lift and ceiling lift systems are user friendly and you will not have much problems using them. For Maintenance wise, floor lifts are easier to repair when it is broken. It can even be sent back to the dealer for repair. It is more complex when ceiling lift breaks down. You may have to request for technical support as it is difficult to assess the fault, especially in the track system. It is also a hassle to maintain the track which is located on the ceiling. You will need to clean the track regularly as dust build up will obstruct the movements of the lift.

Tips to self maintain stairlift

It is important that most stairlift owners do their maintenance if they wish to prolong the working lifespan
of their stairlifts. They should pay special attention after their warranty has expired as replacement parts
are expensive and difficult to find if the model is no longer available on the shelf. Majority of the stairlift
owners will neglect to perform this regular duty and ended up hiring stairlift repair service which are often
costly.
Therefore, it is helpful if families or kins of stairlift users know some simple stairlift maintenance skills,
so they can do their regular self check on the stairlifts. In fact, you can refer to the stairlift manual to
pick up some simple skills on how to check the health of the stairlifts.
One of the first things you should know is how to open up the stairlift system to view the inside of the system.
You will need the correct set of tools in order to open up the side panels of the stairlifts. A standard philips
screwdriver should be able to do the job.
Secondly, when faced with the internal circuitry, you should open the stairlift manual and use it as a reference
when trying to identify colored wires and the connection points. You can use a dry cloth to clean the connectors
as sometimes, dust can cause intermittent connection problems. Users should have the standard electrical toolset
when they are disconnecting the cabling and connectors. Cable ties are also useful to organize the messy cables
inside.
It is important that most owners of assistive devices do their maintenance if they wish to prolong the working lifespan of their equipments. They should pay special attention after their warranty has expired as replacement parts are expensive and difficult to find if the model is no longer available on the shelf. Majority of the owners will neglect to perform this regular duty and end up hiring repair service which are often costly.  Therefore, it is helpful if families or kins of end users know some simple maintenance skills, so they can do their regular self check. In fact, you can refer to the manual to pick up some simple skills on how to check the health of the stairlifts.
One of the first things you should know is how to open up the system to view the inside of the system. You will need the correct set of tools in order to open up the side panels of the stairlifts. A standard philips screwdriver should be able to do the job.
Secondly, when faced with the internal circuitry, you should refer to the manual when trying to identify colored wires and the connection points. You can use a dry cloth to clean the connectors as sometimes, dust can cause intermittent connection problems. Users should have the standard electrical tool set when they are disconnecting the cabling and connectors. Cable ties are also useful to organize the messy cables inside.
These are general guidelines, it can be applied to most old and  brands such as Acorn, Ameriglide, Brooks, Bruno, Excel, Minivator, Stannah, Summit and ThyssenKrup Access. It does not take a lot of time for someone in the home to maintain the stairlift in tip top working condition. By following the simple steps learnt over the Internet along with the manufacturers’ user manual, users can be spared the anguish of having this important equipment break down frequently. What is more important is that they can save the money from hiring professional repair service companies.