How To Maintain Your Home Lift Chairs In Good Condition

When your mobility is impaired and you are buying a lift chair, the first question, you would be probably asking yourself is how you intend to maintain the chair. Mentioned below are a few of the items that can help you keep the it in good condition.

Replacing Batteries For Lift Chairs

Most likely, all Lift Chairs come with a battery back up. Despite this, batteries usually have a normal life cycle of about 2 years and will need a new set after this. By diligently replacing your battery, you can keep your lift chair running for years to come.

Fabric Stain Removal & Freshener Kit To Clean Home Lift Chairs

The fabric cleaning kit helps to restore your lift chair to the same condition it was in when you purchased it. It comes with a stain remover and a cleaning brush. These cleaners are safe for fabric and upholstery that could otherwise be cleaned with water and without the use of harsh chemicals.

Two Pack Chair Seat Incontinence Pad To Protect Lift Chairs

It is advisable that you purchase the “two pack” chair seat incontinence pads. Not only it saves you money, but you will also have an alternate pad when the other pad is being washed. It not only protects the chair from any stains, but also and soaks up any fluids. It is also machine wash friendly. It comes with three layers (suede, polyester/ rayon and polyester bottom) supported with a water proof vinyl. It also protects the chair from any embarrassing large stains.

Two Pack Chair Seat Protector

This shields the chair from any ugly stains, spills or pet hair or liquids that could leak and ruin the upholstery. They are also machine-washable.

Chair Seat & Back Protector

It protects the chair from any wear and tear, particularly on the worn-out areas and also  protects the seat, its back, and the armrests. The seat’s waterproof backing prevents any liquid from leaking through the seat and back protector, if and when spills happen. The protector is also machine washable.

Full Lift Chair Cover

The cover shields the chair from any stains or any wear and tear that needs to be covered up. It has a spandex stretch cover which stretches to the chair’s frame and makes it easy to tuck in the excess fabric.

Changing Stair Lift Batteries

If you a stairlift userm, one of the parts that you will need to replace before all others is the battery. Stairlifts are designed to last for many years but the batteries reach end of life within a year or two at best and then they need to be replaced on a regular basis. It is also crucial to always check the condition of the battery to ensure no leakage as it may damage the electronic parts inside.

Battery Specifications

The average stairlift is powered by either two or more batteries that are located in the carriage itself. The other location for the batteries is in a box at the base of the system. The batteries are 12V lead acid batteries. Most stairlifts for children and adults have 7Ah batteries whereas those that serve heavier load such as wheelchairs have more powerful 12Ah batteries and they may even have three batteries instead of two.

Buying Stairlift Batteries

Most devices on the market use standard batteries that are mounted in standardised enclosures. Whether you are looking for batteries for Bruno, Acorn or Bison stair lift, chances are the same battery will do for all the brands. You need to check though whether your stairlift takes 7Ah or 12Ah batteries and how many it needs. Once done you can go to sites like batterysharks.com that specialise in replacement batteries for all makes and models of stairlifts.

Prices Of Stairlift Batteries

For a regular 7Ah battery you can expect to pay between $75 and $100 depending on the discount you get and the brand you go for. Yuasa and Panasonic are two of the best brands to go for and a quick way to check the quality of a battery is to feel its weight. More weight equals more lead in the lead acid battery and hence better power capacity as well as life expectancy.

Replacing Stairlift Batteries

Consult the manual that came with your stair lift before replacing batteries yourself. If the model was designed to have user replaceable batteries you can go ahead and follow the instructions. If the manual says that the batteries must be replaced by a professional you should have an electrician do the job. If you are replacing batteries yourself, always make sure you disconnect the mains connection and do not reverse polarity on the batteries as they may cause short circuit. Also lead acid batteries must always be kept upright to prevent leakage.

Cheap Voyager Portable Ceiling Lift

Most of the Lifting Systems for Elderly or physically disabled people are stationary or permanently installed at home. The bigger lifting systems such
as Stair Chair Lifts, Platform and Wheelchair Lifts are too big to be shifted easily. As a result, most elderly or handicapped people only have the ease of
movement within their homes. If they wish to travel, they need to ensure that their holiday destination has all these lifting equipments within its premises.
This is where portable lifting systems can be a useful asset to own. They are often lightweight can easily carried around. The Portable Ceiling Lift or Overhead Lift
is an example of this. Ceiling Lifts are often used at homes to transfer old people and disabled people in and out of their beds. They are usually fixed to
the ceiling track and the it is not easily removed once installed.
Replacing Battery in Portable Lift Systems
People who usually purchase the portable ceiling are expected to travel with the user as the it still requires an abled person to set up and install
the mobile lift system. It is also advisable to bring along a spare battery just in case one is spoilt. The assistant should ensure that the battery
is fully recharged before bringing it on the trip. The battery of portable ceiling lift is 24V 2AH and can be charged using normal wall power point.
Depending on the weight of the user, the battery should be able to last 15-25 transfers. If you noticed that the battery is depleting faster than
usual or consistently hear a beeping sound, it could be a sign that the battery is spoilt and requires replacement.
Benefits of Portable Ceiling Lift
The Portable Ceiling Lift is very light and weighs between 12 to 16 pounds. It is made for portability with easy catch to the rails and can be instantly
deployed for transfer. Though it is lightweight, the portable system can still manage to hoist close to 440 pounds. Some models of Portable ceiling lifts
come with remote controls.
Cheap Portable Ceiling Lift
The system costs in the region of $2000 to $3000, however, if you are looking for cheap portable ceiling lifts, you do not have to look further than our
<used stairlift store>. We sell discounted Portable Ceiling Lift systems amongst others such as bath lifts, swimming pool lifts and floor lifts.
Our Portable Ceiling Lift systems such as Voyager have received positive customer reviews and have attractive prices for you. We can also provide training on how to
change the battery of lift system and maintain the portable lifts in good condition. We also have a team of dedicated technicians who can help you
troubleshoot problems with portable lift systems and other handicap lifting equipments.

Most of the Lifting Systems for Elderly or physically disabled people are stationary or permanently installed at home. The bigger lifting systems such as Stair Chair Lifts, Platform and Wheelchair Lifts are too big to be shifted easily. As a result, most elderly or handicapped people only have the ease of movement within their homes. If they wish to travel, they need to ensure that their holiday destination has all these lifting equipments within its premises.

This is where portable lifting systems can be a useful asset to own. They are often lightweight can easily carried around. The Portable Ceiling Lift or Overhead Lift is an example of this. These are often used at homes to transfer old people and disabled people in and out of their beds. They are usually fixed to the track and the it is not easily removed once installed.

Replacing Battery in Portable Lift Systems

People who usually purchase these portable lifts are expected to travel with the user as it still requires an able person to set up and install the mobile lift system. It is also advisable to bring along a spare battery just in case one is spoilt. The assistant should ensure that the battery is fully recharged before bringing it on the trip. The battery specification is 24V 2AH and can be charged using normal wall power point. Depending on the weight of the user, the battery should be able to last 15-25 transfers. If you noticed that the battery is depleting faster than usual or consistently hear a beeping sound, it could be a sign that the battery is spoilt and requires replacement.

Benefits of Portable Ceiling Lift

The Portable Lift is very light and weighs between 12 to 16 pounds. It is made for portability with easy catch to the rails and can be instantly deployed for transfer. Though it is lightweight, the portable system can still manage to hoist close to 440 pounds. Some models of Portable ceiling lifts come with remote controls. You can read the comparison with floor lift here.

Replace home stair lift parts

Replace home stair lift parts after a few years of usage is common for owners. Let me first introduce you to the different parts and components of stair lift and in some cases, electric stairlift systems. Most of the major manufacturer’s do provide stair lift parts through their local distributors.  You can find brands including A1, Acorn, AmeriglideBruno, BrooksExcel, Bison, Summit, Stannah and Sterling stair lift parts. In some cases, users can even change the faulty stair lift parts themselves with the proper guide.

Rail or Track of the stair lift is where the chair will be moving along as the seat goes up and down the stair lift. The rails can be either straight or curved. Users have to take note that the tracks do not become rusty overtime as it may have been exposed to water or in a humid home condition.  Users are advised to add lubricating oi to ensure smooth operations, otherwise, the stair lift will create a creaking noise when in operation. The tracks can be replaced as a whole and it is not a complicated process. Straight rail tracks are easy to replace as they are readily available. They are also cheaper. Curved rail tracks will cost more as they need to be customized individually. It also takes more work to replace curved rails of home stair lifts. You can usually hire local distributors to change the tracks of your stairlift at home or office and they will send their engineers for a site survey first before advising on the cost.

The seat of the stair lift is also important as this is where the user will directly use the system. After prolonged usage, the padding of the stair lift might wear off or there may be tears on the seats. This can cause discomfort to users. Changing of the seat is simple and users can simply walk in to any local home furniture shop to buy paddings or cushions.
The seat belt of the system can also be changed if is faulty and may pose a danger.
Electric stairlifts consist of electrical and mechanical parts which are can easily malfunction and cause problems. The control unit is a good example. It is main interface to the stair lift and if the buttons are not responding, then it means a break in electrical communications or problems with the main circuit board within. Newer stair lifts with better electrical system will alert the users with constant beeping sounds whenever there is operation problem.

The battery of the home and office stairlift is an important component which users have to maintain or replace when it is faulty. Do not buy second hand lift parts which without first checking its function as some may be defective.  Users have to take note whenever your stair lift beeps as it signals some problems within, contact your distributor if you are still under warranty. Usually, the electrical parts inside the stair lifts are proprietary to the each manufacturer and parts may have to be ordered from overseas.

Replace stair lift battery

Changing battery is a duty of stairlift owners. These devices used to run alternate current or AC power. This is done by having the electric cable lined along the track to supply the alternating current. Wheelchair manufacturers such as Stannah, A1, Acorn and Bruno have designed their own method of supplying the AC current to power the stairlift. AC powered lifts are plugged into the household or building electrical system. Therefore, in the event of a power blackout in the building, the stairlift will stop working altogether. This will pose a hazard to users, mainly wheelchair bound or elderly people. They will not be able to evacuate the building in time. The AC electrical wiring can also trip leading to fire or electrocuting users. The movement will also be in a stop start manner as AC current is not stable by nature.

Advantages of Direct current DC powered stair lifts

DC power has many advantages over AC power. First and most important is that the direct power source is easy to install and maintain. DC powered model has a standalone rechargeable battery. The battery needs to be plugged into a wall socket to recharge. The normal household power supply of 240V will be stepped down to 24-38V direct current for the stairlift. The fact that a DC battery can operate the equipment without constant power connection is its biggest advantage. During power outages, the lift is still able to perform its duty and move users up and down the steps with ease. It can still operate for around 20 up/down times before the battery goes flat. DC battery is also quieter than AC power source.

Charging stair lift battery

The different manufacturers have their own methods of charging the batteries and they generally fall into two methods. Stationary charging or using charging strips. Stationary charging refers to the case when the chair is at either end of the track and locked in its position where charging can take place. Each end is called a charging point where the stairlift fits into the positive and negative ends of a charging point. If it is not properly fitted in position, the user will hear a beep sound to remind him to do further adjustments. Charging strips are lined along the tracks as it moves and also charging itself at the same time. This will ensure the batteries stay fully charged all the time. However, this system has its disadvantage as there are more parts of the charging system which needs to be maintained and higher possibility or error due to wear and tear from the constant movements of the lifts.

The rechargeable battery pack is sold in a sealed unit and is usually a direct replacement. It is like replacing the batteries from your household controllers. It can hold a better charge too. Batteries will have to replaced between 1 to 2 years of usage as the battery’s fluid runs out. The power and current ratings are usually 12Volts (V) and 7 Ampere hour (Ah).

The job or replacing batteries belong to qualified technicians but users can also try changing the batteries themselves. Manufacturers will provide a user manual or guide on how to change the batteries. Users have to be careful if they wish to replace stair lift battery themselves.

First is to remove the charging source and plug out the power plug. Second is to remove the seat or carriage  cover and safety edges. All the while, users are reminded not to touch any naked or messed up the internal wiring. Third step is to remove the connections to the batteries and remove them one by one. Place the new batteries, double check to make sure their polarity is correct, otherwise, you will cause system short circuit and cause the main circuit board to malfunction. Retrace the above steps to get the stairlift fully functioning on new batteries.